Precautions for use of automatic pipe cutting machine
Time:2020-03-04
Views:368
Nowadays, the automatic pipe cutting machine is also used in many fields, because it has been favored by users through technical improvement. Since there must be a lot of things to pay attention to when operating, I will make a summary of these things for you.
Most people are probably familiar with the automatic pipe cutting machine. Generally, it is used frequently in industry, and a good device is to make customers feel at ease when using it. In terms of safety, full consideration should be given to the personal safety of customers and the convenience of use and adjustment. So, of course, it is also done. As a mechanical equipment, we should also know that its price is relatively expensive, so we should pay attention to it when we use it. In the process of operation, it is necessary to add some macromolecular suspended solids particles. When these particles are larger, the number of collisions per unit volume will increase, which is conducive to the formation of larger flocs, and the settling speed is also fast,. Therefore, this aspect must be paid attention to when using the automatic pipe cutting machine. Of course, the reason why you do this is because it is conducive to the sedimentation of suspended solids in wastewater. Therefore, the large particle suspended solids should occupy a certain proportion, which can have a good adsorption effect on the small particles in the sewage. This sentence shows that the probability of contact and collision will increase, and then the large alum will be formed. In turn, the collision opportunity is increased, and the two promote each other to produce larger particles. Thus, the settling speed of suspended solids is greatly increased.
Therefore, in order to avoid problems during the operation, what I‘m going to tell you today is what you should pay attention to. Therefore, it is very important to clean the equipment after operation, which is also something that operators must pay attention to. The automatic pipe cutting machine shall regularly adjust the tightness of the spindle drive belt of the CNC horizontal machining center to prevent rotation loss caused by belt slipping; Check and maintain the lubrication of the spindle, replenish the oil in time, and clean the filter regularly. If you do this well, you can extend its life. Of course, it is also recommended that you clean up the sundries in the automatic pipe cutting machine after use, and then it can be directly used when starting up. If you haven‘t handled it at that time, you should clean it before starting up. If we don‘t clean it up in time, it will affect its effect. In particular, the spiral shaft head and the equipment slot of the equipment should be inspected regularly, and it was decided that no metal or wood blocks were allowed inside. Once there is one, it should be handled in a timely manner, because it affects the main factors of extreme damage.
From this, you can see that there are still a lot of things to pay attention to when using the automatic pipe cutting machine, but you don‘t need to worry too much. As long as you operate according to the regulations when using, there will be no problem. I hope these contents can help the relevant people better.
Previous：Some Solutions to Uneven Notch of Metal Circular Saw 2020/03/04
ChatNow